A guide to our Flame resistant icons

ANTI-STATIC 

Designed to reduce the build up of excess static electricity. This offers a level of protection against ignition hazards such as flammable materials and gases. 

ANTISTATIC EN 1149-5: 2018 

Meets the performance requirements of EN 1149- 5:2018 Protective Clothing – Electrostatic Properties – Part 5: Material Performance and Design Requirements. 

ARC THERMAL PERFORMANCE VALUE 

A value of the energy necessary to pass through any given fabric to cause with 50% probability a second or third degree burn. This value is measured in calories/cm². Usually measured in terms of Arc Thermal Performance Value (ATPV). Simply put the ARC rating determines the protective characteristics of the fabric. The higher the ARC rating value the greater the protection. When the product is sold to protect workers from arcing faults, clothing manufacturer are required in indicate the ARC rating. For more info visit www.nfpa.org. 

ENA NENS 09 

ENA NENS 09 conforms to National Guidelines for the selection, use and maintenance of Personal Protective Equipment for Electrical Hazards. 

FLAME RESISTANT 

Garments designed to inhibit ignition, prevent and reduce combustion or effectively self-extinguish. Wearers of protective clothing must ensure all potential hazards are identified prior to selecting appropriate FR garments. For optimum performance; FR garments should be worn correctly, and properly laundered and maintained. 

HI-VIS DAY 

A garment that uses hi-vis materials for daytime use only. The hi-vis material must encircle the upper torso. Complies with AS 4602.1:2011 Hi-vis Safety Garments Class Day. 

HI-VIS DAY/NIGHT 

For use in day, night, dawn, dusk or in poor weather conditions where there is illumination from headlights. Complies with AS 4602.1:2011 Hi-vis Safety Garments Class Day/Night. 

HI-VIS NIGHT 

Garments designed for night use using retro reflected light. Complies with AS 4602.1:2011 Hi-vis Safety Garments Class Night. 

ISO 11612:2015 

Certified to ISO 11612:2015 Protective Clothing – Clothing to Protect Against Heat and Flame Standard. 

LIGHTWEIGHT FABRIC 

Fabric is lightweight to keep you cool and comfortable. 

MOISTURE MANAGEMENT 

Fabrics designed to keep you dry and comfortable: moisture wicking, quick drying and breathable. 

NFPA 70E 

Tested to the USA’s NFPA 70E:2015 Electrical Safety in the Workplace Standard. NFPA 2112 Certified to the USA’s NFPA 2112 Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire. 

NFPA 2112 2018 

Certified to the USA’s NFPA 2112 Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire. 

PERSONAL PROTECTIVE EQUIPMENT 

Arc rated clothing selected to meet a required minimum incident energy exposure level (in cal/cm²) tested in accordance with NFPA 70E:2015 – Standard for Electrical Safety in the Workplace. 

EXCELLENT UPF RATING 

An Ultraviolet Protection Factor (UPF) rating for Ultraviolet Radiation transmitted through a fabric onto the skin. Look for garments with a UPF 50+ rating to be assured of excellent protection. Complies with AS/NZS 4399:2017 Sun Protection Clothing Classification. 

WATER RESISTANT 10K 

Garments constructed using highly water resistant fabrics measuring water resistance under pressure in millimetres (mm).